2000 Honda s2000 248.4bhp with print out

Description:

MY2000 honda s2000 for sale
Has jdm f20c engine and ecu fitted running a very healthy 248.4bhp with print out 209 at the wheels considering the jdm engine only comes with 247 out of the factory and you get almost zero power gains from breathing mods on these engines as the standard equipment is very good and the engines are almost maxed out from the factory you can spend like 4k on n/a mods and get around 40bhp so is a great runner and burns almost no oil at all just done 700+ mile round trip and it didn’t burn a drop (honda vtec engines do burn oil slowly when vtec is used frequently due to how high these engines rev which creates very high cylinder wall tempretures due to such high friction it burns the oil as its sprayed on the cylinder walls) its always run on shell vpower nitro plus and nothing else i service it every 3-4 thousand miles religiously and comes with a folder full of receipts and full Honda service history up to around 80,000 miles just turned over 102,000 I have been building this as my promotion car for my garage and all the parts are brand new within the last 12 months spec list:
Jdm f20c engine and ecu
Recent clutch around a year and a half ago
Ebc ultimax slotted discs front and rear
Ebc yellow stuff pads front and rear
Hel braided brake lines all round
Dot 5.1 brake fluid
BC racing coilovers
Ultra racing front upper strut brace recently powder coated
Blox 20mm anti bump steer kit rack spacers
K&N fipk induction kit with custom made cold air feed (standard airfilter included)
Super street cat back stainless exhaust system spoon n1 rep twin exit
Decat and lambda sensor spacer (cat included)
Hond-r jdm speed limit defencer
Rota fighter drift alloys 17x9 all round
Nankang ns2-r road legal semi slicks coverd 700 miles 255 40 17 on the rear and 235 40 17 on the front
Berlina black hard top
Izzy street hard top brackets front and rear
Aerial removed and flushed off
Fiberworx front lip only one made at the mo
Fiberworx canards
Fiberworx custom made rear diffuser
One off custom made and designed by me rear corner spats to match the side diffusers
Rx7 feed style side diffusers
Smoothed front bumper with vents cut out and meshed
Driftworks carbon gt wing customised by me and custom made rising sun spoiler legs gives great downforce its not just for looks gives so much more confidence at speed
Sfs performance silicone coolant hoses
Blue Skunk2 vtec solenoid cover
Blue Skunk2 engine bay dress up bolts
Blue Skunk2 oil filler cap
Skunk2 weighted gear knob
Aircon system removed and new aux drive belt
Blue tuner internal drive wheel nuts
Blue alloy rad stays
Blue alloy battery tie
All fluids flushed and replaced
Blue leather gear gaiter
Blue floor mats
Tonneau cover
And probably more I have forgotten
Im very very ocd with my cars and everything has been done to a high standard this cars is mint I clean it before and after every use and is constantly garaged and only used in the nice dry weather and drives and handles superb engine pulls very well and is very healthy
im not sure if i do want to part with it so i am just gauging interest for the moment as i do have alot more planned for this car but i have always wanted a nsx its one of my dream cars so was planning on putting the money from this towards one but i also wouldnt mind seeing what you have to offer it must be jap and no front wheel drives must be rwd or 4wd and it must be manual no autos maybe a manual turbo toyota supra or a nicely specd skyline would love a r34gtt but a nice 33 or 32 will be considerd or an evo 6 or 8 i value it at £8,500 ive put so much time and effort into this car and everything is new in the last 12 months and cost me over 10k to get it this far