View all pics (5)
|
BANDIT STREETFIGHTER
Location: North West England - chester
Swap Value: £3.000+
Description:
Here we have my pride and joy. My 2005 bandit 650. This was originally a fully faired ABS model with luggage options and a farty touring screen before it took on a lot of modification.
I will do my best to cover everything in this listing but it won't be easy as this has been an on going project for nearly 2 years
Performance parts -
Full Vance and Hines megaphone drag system
Vance and Hines 5 degree ignition advancer
K&N air filter
Dynojet adjustment to fuelling
Heavy duty clutch plates
Dynacoils + leads
P.A.I.R.S system blanking kit
Handling/suspension
Gsxr750 slingshot front end
CNC One off anodised top yoke + risers
Flat renthal handlebars
Gsxr1000k2 shock absorber regassed to 300psi
55mm jack up(side stand lengthened to compensate for lean)
GSF 1250 2010swingarm with 180 back wheel
Braking
ABS FULLY REMOVED
black Viper braided lines front and back
Wavey discs front and back
Tokico 4 pot gsxr front calipers
Tolico single over slung rear caliper (2010 bandit 1250)
Consumable bits
Fresh Michilin road pilot 4 front tyre
Michilin road pilot3 rear tyre
New JT Z1R x ring gold chain
Renthal 45 tooth rear sprocket
Renthal 15 tooth front sprocket
EBC Double H sintered pads front and back
Paint + powdercoating
Fresh bodywork paint all over gloss black
One off painted wheels black into gold fade
Powdercoated grab rail, front calipers,fork legs, yokes +risers, handlebars, rear Swingarm engine casings, front mudguard carrier, passenger pegs (thats all I think)
Posh bits.
Pro bolt engine kit, yoke bolts, rear grab rail Titanium rear disc bolts and chain adjuster bolts
Pro bolt front master cylinder cap
DANMOTO Adjustable racing rearsets
Stubby adjustable tracktech levers
CNC Machined engine windowed casings (awaiting final generator casing back from
Powder coaters)
Bare grillscustom oil cooler cover - 9 carat gold plated
Oberon chain adjusters
Paaschburg and wunderlich headlight with dipped and mainbeam (extremely bright)
A16 Shotgun undertray with LED brakelights
Trailtech vapour dashboard and speedo
Custom covered ELSE MADE seat
Relocated ignition barrel
Milders Mask custom headlight mask
Service info
Mileage - 24,000
MOT 11 months
(Will MOT for sale if required)
Can provide 33bhp restrictors if required but unsure with other power mods they will aid the running of the bike.
Well serviced oil changed every 2000 mile always castrol power release 10w40 semi synthetic
Recently had valve clearances set
Air filter cleaned, Carbs balanced and jetted to suit new exhaust system + cam chain replaced to heavy duty DID
NOT due any big services.
So overall a very subtly customised bandit Streetfighter that punches well for its weight with all power mods gearing and noise you'd be struck to find another 600/650 to pull the attention this one does or put the smile on your face this bike can.
In the midst of building a 1216cc engine for this bike running 1216 pistons and GSXR1100 K cams just the final pieces to go all refurbed with new parts sunk some serious cash into this project. Could be included for the right deal/price
Bad points –
Headlight mask paint crazed needs paint was planning on airbrushing the lot so not got round to it yet.
Exhaust stud snapped on inner pipe causing small blow to be removed.
Speedo intermittent requires new cable £20
No time wasters I don't need to sell this bike nor do I want your cagiva mito and a packet of quavers.
This being said I would be happy to see some PX options looking at a good TL1000R GSXR1100 GSXR1000 or WHY Streetfighters welcome.
Have listed elsewhere + will be riding during listing so mileage will change.
Welcome to ask questions and thanks for looking through the listing
Located in Cheshire
|
|