Seat leon cupra!!! MODIFIED!!!

Description:

To start with Its had a full exterior vinyl wrap in green, done less than a year ago, also it's sat on a full set of adjustable coil overs which were recently set at a higher position for its MOT, so have been fully greased so no chance of seizing up anytime. It also has had a front mount intercooler installed plus has recently had a remap so is now running over 200bhp, I've fitted a new recirculation valve to the car and a new n75 valve. ReCently fitted both front wishbones including ball joints and bushes as well as a new drive shaft, plus new wheel bearings, the interior is in perfect condition apart from drivers bolster which is starting to wear, all dash lights and interior lights fully working. The car has a full stainless steel exhaust with a decat pipe, sounds awesome... But due to the decat pipe the engine management light is on. All break pads have recently been changed and all tyres have plenty of tread still on them. The wheels currently have spacers, 10mm on the front wheels, 20mm on the rears. The car also has a S2000 air filter fitted with a silicone reducer which sounds pretty awesome! The car is cleaned regularly inside and out as I hate having a dirty car! And finally I have just fitted a new k03s turbo so back to full power!!! :)

Now for the bad bits, the car is currently on 158k miles,a lot of which has been traveling to car shows, but also as a daily runner it may increase, but ive never had any problems with the engine at all! plus underneath the car the vinyl has scrapped a little due to the car being a lot lower than it is now. The airbag light is currently on but thats due to having the seats out and putting them back in, and finally the glove box handle has broken off but may be able to replace before swap.

I'm only testing the water as such to see what sort of interest it gets and am definitely in no hurry to be parted with it.

Plate not included.

Any questions just ask.