1993 VW Polo Coupe Fox 1 litre with GT Head & Cam, poly bushes...etc

Description:

Up for swaps I have my 1993 VW POLO COUPE, Tornado Red, 1lite with 1.3 GT head and camshaft,
The car has done 78,000 miles
Engine swapped over last month with another AAU 1 litre engine with 56,000 miles on it,

1.3 GT Cylinder head and cam fitted at the time of the engine swap,
Before dropping the new engine in it was treated to new oil, clutch and clutch bearing, new spark plugs, new oil filter, new fuel filter, new gaskets all round, new coolant temp sensor and the head has been rebuilt with new oil seals and the valves re-ground.

Whilst the car was off the road I also installed a set of TaTechnix Coilovers, full front and rear poly bushes, front ARB blocks, camber adjustable top mounts, rear camber shims set to -1.5 degreese of camber, polo g40 front brake upgrade (239x20mm vented disks ) with new disks and pads, new wheel bearings all round, new handbrake cables, new drums on the back, new rear shoes, new rear wheel cylinders.

The car also has polo G40 rear lights, OMP Steering wheel and boss,vw corrado VR6 Front seats, clear indicator lenses,

Engine is also fitted with mk3 golf induction elbow, stainless steel exgaust manifold, stainless steel exhaust system with de-cat and straight through centre section.

The car was MOT'd in August

Wheels: currently sitting on a set of 13" x 6.5j smoor 3 piece splits with 175/60/13 yokohamma ao48 on the rear and 175/50/13 yokohamma a539 tyrees on the front

I also have a plenty of spares including dashboard, doors, bonnet interior trim parts and a 1.4 8v engine that can also be included for the right price or car!!!

The list of mods ........

Coilovers
Braided flexi brake lines (including rear hard lines)
New drums, shoes, springs and cylinders
New handbrake cables
Front poly arm bushes
Rear poly axle bushes
Front poly ARB blocks
80mm stud conversion
D1spec alloy wheel nuts (BLACK)
2xa539 Yokohama 175,50,13" (f)
2xa048 Yokohama 175,60,13" (r)
New front and rear wheel bearings
Camber adjustable top mounts
VW 2 callipers
239x20 mm vented disks
Mintex pads
Clear indicator lenses
Polo g40 rear lights
Polo g40 door cards
Coraddo seats
Omp steering wheel & boss
Full stainless with centre delete
Lamba sensor removed
Solid Gearbox mount
Hockey puck front engine mounts/spacers
4-2-1 stainless manifold
Shaved inlet manifold heater fins
1L AAU block with 1.3 GT head & Cam
Double valve springs
Re ground valves
New head gasket
New valve seals
New clutch and bearing
New fuel filter
New oil filter
New coolant temp sensor
New fuel tank
8mm braided fuel line & SS banjo bolts
Mk3 golf elbow intake with k&n filter
All chassis bolts replaced for stainless
Rear upper alloy strut brace
New wing mirrors
13x7/8j Weller 8 spoke steel wheels
13x6.5j Smoore 3 piece splits (rebuilt)
4x original steel wheels

I've probably forgotten a few bits too!


Any other questions then feel free to drop me a text on 07512338780 (Dean)